Pressing & Finishing

Dunlap Sunbrand International, Inc.’s range of pressing and finishing products.

HashimaPressing & Finishing

HASHIMA HP-900LF / HP900LFS Fusing Press (Straight Linear)

The Hashima HP-900LF / HP-900LFS is a straight linear fusing press. Featuring continuous type operation, automatic belt warping prevention and feed back system. Electronic Thermostat and SSR, temperature difference range is kept at +/- 3°C. The SSR’s electronic parts have no contact points making for durability.

Standard: Strip-Off Device (HP-900LFS)
Option: Side Rail Stacker (HS-6030RS), Cooling Fan, II Type Extend Table (HP-900LL)
Consumption: Teflon Belt

  • Various stackers can be used with this machine.
  • This machine has a front conveyor belt which greatly increases production levels.
  • The Rotary Strip Off Device can be attached as optional equipment.
  • By pushing the heater control switch the temperature of the upper and lower or front and rear heater can be easily controlled. This means various materials can be used safely.
  • The pressure roller is covered with a layer of silicon rubber. The upper and lower pressure rollers are completely separated when the pressure is set at 0.
  • The heating plate is covered with special hard alumite, making it durable. The exchange of belts is very easy.
  • The Belt Stopping Device stops the belt automatically if the belt warps therefore protecting the belt.
  • The entrance of the feed in point can be adjusted easily according to the thickness of the material and interlining being used.
  • An anti puckering roller is installed in this machine. This roller’s position can be adjusted.
  • Wing tables can be attached to the work table. When these tables are not in use, they can be folded down. (Option)
  • The pressure is easily adjusted.
  • Depending on which of the optional tables is used, various shapes can be easily pressed.
HP900 Fuse Press
Description:Straight Linear Fusing Press
Model:HP-900LF / HP-900LFS
Voltage:3P200V / 3P380V
Rated Output:Heater: 12kw
Motor: 270W/295W
Fusing Width:900mm
Belt Speed (Max):102m/minute
Presser(Max):41N/cm2 (4.02kg/cm2)
Temperature(Max): 195°C
Heating Time:6~28 Seconds
Size:1,200mm x 1,490mm x 3,300mm
Weight:450kg
Specifications

Please Contact Your Preferred DSI Sales Office Today For All Your HASHIMA Needs!

HashimaPressing & Finishing

HN-880C / 790G Needle Detector (Conveyor)

Hashima Needle Detector HN-880C*790G
Featuring 40M/min conveyor speed, adjustable conveyor speed for various accessories. Auto pre-check of sensor.

Scalability allows for connecting to RFID and barcode reader. Optional HS-601 sorter can be attached behind detector.

Equipped with 7 inch LCD touchpanel monitor; Operator selectes 2 types of sensitivity setting settings (10 stages (100 step))  and Sizing method (6 step).

Hashima HN880C

Model: Conveyor Type Needle Detector
Type: HN-880C-130/140/160/180, HN-790G-120
Detecting Method: Magnet induction System
Detecting Ability: Fe 0.8mm(120mm), Fe 1.0mm(140mm), Fe 1.2mm(160mm), Fe 1.5mm(180mm) sphere or above
Sensitivity Adjustment: Decimal (100 steps) or Sizing(6 steps)
Detecting Width: 600mm
Detecting Height: 120m(Standard) / 140mm / 160mm / 180mm (790G 120mm)
Alarm Method: Buzzer / Portion Lamp
Belt Speeed: 40~15m/Min
Power Supply: Single Phase
1:Rated Output 150W
Dimensions: 1598mm(L) x 1040mm(w) x 903mm(h)
Weight: 230Kg
Product Guider: Standard

Please Contact Your Preferred DSI Sales Office Today For All Your HASHIMA Needs!

JiffySteamerPressing & Finishing

Jiffy Steamer J-4000 Pro-Line Series Commercial Clothing Steamer

The J-4000 Pro-Line series commercial clothing steamer is the series most powerful model, designed specifically for commercial use. Department stores, restaurants and other businesses around the world rely on the efficiency of the J-4000 as an integral part of their operations. Steam is the gentler alternative to ironing and is great for removing wrinkles from clothing, tablecloths, bedspreads and delicate materials.

  • 5.5 ft / 1.68 m flexible rubber hose
  • Convenient standby and steam settings
  • Reaches standby temperature within 15 minutes
  • Ready to steam within 2 minutes once at the standby temperature
  • All brass couplings
  • Solid die cast aluminum outer housing for durability
  • 304 stainless steel internal boiler tank
  • No water lines that could become clogged with hard water deposits
  • 1 gal / 3.79 L self-contained water tank
  • Sight gauge for quick view of water level and sediment buildup
  • Color-coded high temperature wiring
  • Fusible link with automatic shut-off for safety
  • 360-degree swivel casters for mobility
  • 7 ft power cord with molded storage clip for more manageable handling
  • 3-Year Limited Product Warranty
  • 24-hour repair service available

Standard Plastic Steam Head:

  •  6 in / 15.2 cm wide plastic steam head

Metal Steam Head:

  • 6 in / 15.2 cm wide metal steam head

Interchangeable Steam Head:

  •  9 in / 22.8 cm bent aluminum pipe head attachment, “B” brush steam cleaning head, 6 in / 15.2 cm wide metal steam head and 12 in / 30.4 cm wide carpet steam head 

SPESIFICATIONS FOR ALL MODELS:

  • Optional Steam Head Attachment: 6-inch/15.24cm wide plastic steam head, 6-inch15.24cm wide metal head, or  9-inch/22.86cm bent aluminum pipe head attachment, “B” brush steam cleaning head, 6-inch/15.24cm wide metal steam head and 12-inch/30.48cm wide carpet steam head 
  • Carton Dimension: 20 in x 12 in x 13 in (50.8cm x 30.48cm x 33.02cm)
  • Assembled Dimension: 20 in x 11 in x 61 in (50.8cm x 27.94cm x 154.94cm)
  • Carton Weight: 26 pounds/11.79kg 
  • Electrical Certifications: UL, cUL, TUV/GS, CE, NOM and ANCE Listed
  • Steam Time per Filling: 1 hour and 45 minutes
  • Water Capacity: 1 gallon/3.79L
  • Steam Temperature: 212° F / 100° C

FOR 120 VOLT MODELS:

  • Voltage: 120V
  • Wattage: 1500W
  • Cord Plug: NEMA 5-15

FOR 230 VOLT MODELS: (FOR USE OUTSIDE USA)

  • Voltage: 230V
  • Wattage: 1500W
  • Cord Plug:  BS-1363, BS-546, CEE-7, ETSA S-86, SI 32, NEMA 5-15

Please Contact Your Preferred DSI Sales Office For All Your Jiffysteamer J-4000 Needs!

Pressing & FinishingSilverStar

SilverStar EZ-85-110v-S Steam Iron

The Silver Star EZ-85-110V-S Iron is light and easy to be handled in narrow spaces, because of the gravity dripping emission method not requiring a boiler. The EZ-85-110V-S iron comes in two categories: Middle Process Irons and Completion Process Irons.

Featuring a responsive touch function steam button, Urethane handle reducing fatigue of long handling, easy lamp and double cut-out system in addition to 5 level temperature adjustment (using dial): Levels 1 & 2 – Pre-heating, Level 3 – Silk, Level 4 – Cotton & Wool, Level 5 – Linen etc.

Loader Loading…
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download a Copy of the Document [169.00 B]


Please Contact Your Preferred DSI Sales Office For All Your Silver Star Needs!

HI-SteamPressing & Finishing

HI-Steam PND-2500A Vacuum Board

The Hi-Steam PND-2500A Medium-duty, Commercial Vacuum Board features a professional strength self-contained vacuum, heated pressing surface, with optional vacuum swing arm and heated sleeve buck.

Loader Loading…
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download a Copy of the Document [169.00 B]


Please Contact Your Preferred DSI Sales Office For All Your Professional Hi-Steam Needs!

HI-SteamPressing & Finishing

HI-Steam PND-1000AC Vacuum Board

The Hi-Steam PND-1000AC Vacuum Board features self-contained vacuum, headed pressing surface, and is ideal for tailors, alteration rooms, drop-off stores, clothing stores, valet service, tuxedo and bridal shops. Designed for small spaces.

Loader Loading…
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download a Copy of the Document [169.00 B]


Please Contact Your Preferred DSI Sales Office For All Your Professional Hi-Steam Needs!

HI-SteamPressing & Finishing

HI-Steam EFE-290 All Steam Iron

The Hi-Steam EFE-290 All Steam Iron features a light touch steam valve, metal steam regulator and includes 2 Teflon hoses and silicone iron rest. With a welded internal construction and a thermo-tech jacket.

Loader Loading…
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download a Copy of the Document [169.00 B]


Please Contact Your Preferred DSI Sales Office For All Your Professional Hi-Steam Needs!

HI-SteamPressing & Finishing

HI-Steam EFE-55W Bottle Iron

The Hi-Steam EFE-55W Bottle Iron is ideal for dry cleaning plants, drop stores, alteration departments, tailor shops and retail stores. Generates its own steam without boiler. Uses ordinary tap water and is ready in 3 minutes.

Loader Loading…
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download a Copy of the Document [169.00 B]


Please Contact Your Preferred DSI Sales Office For All Your Professional Hi-Steam Needs!

HashimaPressing & Finishing

Hashima HP-450MS-HAS Compact Fusing Press

The Hashima HP-450MS-HAS compact fusing press features automatic belt warping prevention device, upper belt warping prevention system, direct limit switch type like lower belt, fusing belt width 450mm, no-slip rubber driving roller and MS-Model h

Loader Loading…
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download a Copy of the Document [83.20 KB]


Please Contact Your Preferred DSI Sales Office For All Your HASHIMA Product Needs!

HI-SteamPressing & Finishing

HI-Steam MVP-35 Auto Boiler w/Pump

HI-Steam MVP-35 Auto Boiler w/Pump provides the following features: Mini boiler with professional iron, no plumbing connections reqired. Perfect for busy pressing stations needing non-stop steam supply.

Loader Loading…
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download a Copy of the Document [169.00 B]


Please Contact Your Preferred DSI Sales Office For All Your Professional Finishing And Pressing Needs!