Hashima

The Hashima HP-900LF / HP-900LFS is a straight linear fusing press. Featuring continuous type operation, automatic belt warping prevention and feed back system. Electronic Thermostat and SSR, temperature difference range is kept at +/- 3°C. The SSR’s electronic parts have no contact points making for durability.

Standard: Strip-Off Device (HP-900LFS)
Option: Side Rail Stacker (HS-6030RS), Cooling Fan, II Type Extend Table (HP-900LL)
Consumption: Teflon Belt

• Various stackers can be used with this machine.
• This machine has a front conveyor belt which greatly increases production levels.
• The Rotary Strip Off Device can be attached as optional equipment.
• By pushing the heater control switch the temperature of the upper and lower or front and rear heater can be easily controlled. This means various materials can be used safely.
• The pressure roller is covered with a layer of silicon rubber. The upper and lower pressure rollers are completely separated when the pressure is set at 0.
• The heating plate is covered with special hard alumite, making it durable. The exchange of belts is very easy.
• The Belt Stopping Device stops the belt automatically if the belt warps therefore protecting the belt.
• The entrance of the feed in point can be adjusted easily according to the thickness of the material and interlining being used.
• An anti puckering roller is installed in this machine. This roller’s position can be adjusted.
• Wing tables can be attached to the work table. When these tables are not in use, they can be folded down. (Option)
• The pressure is easily adjusted.
• Depending on which of the optional tables is used, various shapes can be easily pressed.

Please Contact Your Preferred DSI Sales Office Today For All Your HASHIMA Needs!