HashimaPressing & Finishing

HASHIMA HP-900LF / HP900LFS Fusing Press (Straight Linear)

The Hashima HP-900LF / HP-900LFS is a straight linear fusing press. Featuring continuous type operation, automatic belt warping prevention and feed back system. Electronic Thermostat and SSR, temperature difference range is kept at +/- 3°C. The SSR’s electronic parts have no contact points making for durability.

Standard: Strip-Off Device (HP-900LFS)
Option: Side Rail Stacker (HS-6030RS), Cooling Fan, II Type Extend Table (HP-900LL)
Consumption: Teflon Belt

  • Various stackers can be used with this machine.
  • This machine has a front conveyor belt which greatly increases production levels.
  • The Rotary Strip Off Device can be attached as optional equipment.
  • By pushing the heater control switch the temperature of the upper and lower or front and rear heater can be easily controlled. This means various materials can be used safely.
  • The pressure roller is covered with a layer of silicon rubber. The upper and lower pressure rollers are completely separated when the pressure is set at 0.
  • The heating plate is covered with special hard alumite, making it durable. The exchange of belts is very easy.
  • The Belt Stopping Device stops the belt automatically if the belt warps therefore protecting the belt.
  • The entrance of the feed in point can be adjusted easily according to the thickness of the material and interlining being used.
  • An anti puckering roller is installed in this machine. This roller’s position can be adjusted.
  • Wing tables can be attached to the work table. When these tables are not in use, they can be folded down. (Option)
  • The pressure is easily adjusted.
  • Depending on which of the optional tables is used, various shapes can be easily pressed.
HP900 Fuse Press
Description:Straight Linear Fusing Press
Model:HP-900LF / HP-900LFS
Voltage:3P200V / 3P380V
Rated Output:Heater: 12kw
Motor: 270W/295W
Fusing Width:900mm
Belt Speed (Max):102m/minute
Presser(Max):41N/cm2 (4.02kg/cm2)
Temperature(Max): 195°C
Heating Time:6~28 Seconds
Size:1,200mm x 1,490mm x 3,300mm

Please Contact Your Preferred DSI Sales Office Today For All Your HASHIMA Needs!

HashimaPressing & Finishing

HN-880C / 790G Needle Detector (Conveyor)

Hashima Needle Detector HN-880C*790G
Featuring 40M/min conveyor speed, adjustable conveyor speed for various accessories. Auto pre-check of sensor.

Scalability allows for connecting to RFID and barcode reader. Optional HS-601 sorter can be attached behind detector.

Equipped with 7 inch LCD touchpanel monitor; Operator selectes 2 types of sensitivity setting settings (10 stages (100 step))  and Sizing method (6 step).

Hashima HN880C

Model: Conveyor Type Needle Detector
Type: HN-880C-130/140/160/180, HN-790G-120
Detecting Method: Magnet induction System
Detecting Ability: Fe 0.8mm(120mm), Fe 1.0mm(140mm), Fe 1.2mm(160mm), Fe 1.5mm(180mm) sphere or above
Sensitivity Adjustment: Decimal (100 steps) or Sizing(6 steps)
Detecting Width: 600mm
Detecting Height: 120m(Standard) / 140mm / 160mm / 180mm (790G 120mm)
Alarm Method: Buzzer / Portion Lamp
Belt Speeed: 40~15m/Min
Power Supply: Single Phase
1:Rated Output 150W
Dimensions: 1598mm(L) x 1040mm(w) x 903mm(h)
Weight: 230Kg
Product Guider: Standard

Please Contact Your Preferred DSI Sales Office Today For All Your HASHIMA Needs!

HashimaPressing & Finishing

Hashima HP-450MS-HAS Compact Fusing Press

The Hashima HP-450MS-HAS compact fusing press features automatic belt warping prevention device, upper belt warping prevention system, direct limit switch type like lower belt, fusing belt width 450mm, no-slip rubber driving roller and MS-Model h

Loader Loading…
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download a Copy of the Document [83.20 KB]

Please Contact Your Preferred DSI Sales Office For All Your HASHIMA Product Needs!